DIY Co2 Generator System Kit D501 Blue / Green
DIY Co2 Generator Main Body x 1
Needle Valve x 1
Pressure Gauge with build in safety valve x 1
Complete connecting air tubing x 1
Well suitable for DIY Co2 system and low cost planted tank.
It is suitable for a lot of size of tank, depended on how many materials for the system. You can find the detailed instruction on the English Manual <<<(Click Here for online version)
You could refer the diffusion result on my YouTube video as above.
What do you need to prepare for building up the system?
200g of Citric acid powder or Vinegar
200g Baking Soda powder
Soft drink 2 Litre bottle (Suggestion : Coka Cola plastic bottle) x 2
The bottle must be carbonated beverage bottle, do not use pulpy, green tea, mineral water bottles, etc. trimming valve regulation avoid by sudden big or small, can’t suddenly turn up, after immediately shut down again, so as not to cause abnormal pressure to the bottle.
Extra Tips :
User have better get the last try if the pressure gauge is not working. Please do not connect the diffuser during before the mixed liquid consume about 1 – 2 cm from the surface of mixed liquid, after this, the pressure gauge must work and showing on the green signal.
Make sure carefully observe the direction of the parts before assembly.
The usual wrong handle way will cause abnormal reaction components as follow :
The contrary direction of the check valve and fine-tuning in the direct.